60-Amp Pro Switch-Mode BEC Brushless ESC

Key Features

• Up to 60A continuous current with proper air flow with 75A peak
• 5V Switch-Mode BEC circuit capable of 2.5A continuous current on any recommended input voltage
• Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
• 3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage
• Finned heat sinks
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V), or 70% of battery starting voltage
• Programmable soft start for helis and airplanes
• Auto motor shut down if signal is lost or there is interference
• Programmable timing—5 user-selectable ranges for use with a larger variety of brushless motors
• Programmable throttle input range (1.1–1.9 ms or 1.2–1.8 ms)
• Utilizes new smaller MOSFETs technology to minimize weight
• Radio System Power On/Off Switch
• Optional RS232 Serial Link available for programming
• Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads

Specs

• Brake:Yes - Programmable
• Continuous Maximum Current:60A with reasonable cooling
• Input Voltage:10.82–2.2V
• Input Connector Types:13 AWG with E-flite EC3 connector
• Output Connector Types:13 AWG with 3.5mm Female Gold Bullet Connectors
• Momentary Peak Current:75A (15 sec)
• Dimensions (WxLxH):76x33x13 mm (3x1.3x.5 in)
• Weight:66 g (2.3 oz)
• Wire Gauge:13 AWG
• Cells w/BEC:3-6S Li-Po or 9-18 Ni-MH/Ni-Cd