25-Amp Pro Brushless ESC
Key Features
- Up to 25 amps continuous current with proper air flow
- Finned heat sinks for both the motor drive MOSFETs and dual BEC regulators to support up to 4 sub-micro servos
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
- Programmable throttle input range (1.1–1.9 ms or Auto Select)
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
- Soft start
Overview
This controller has been designed for use in radio control aircraft and to support continuous currents of up to 25 amps when using 2- to 3-cell Li-Po battery packs and up to four sub-micro servos. The ESC features a lightweight plastic case with exposed, finned heat sinks for both the motor drive MOSFETs and, unlike many controllers, the BEC regulators give you a more reliable and powerful power supply for your servos.
Specs
- Brake:Yes - Programmable
- Continuous Maximum Current:25A
- Input Connector Types:16 AWG with E-flite EC3 connector
- Output Connector Types:16 AWG with 3.5mm Female Gold Bullet Connectors
- Momentary Peak Current:30A (15 sec)
- Dimensions (WxLxH):28x48x11 mm (1.1x1.9x.4 in)
- Weight:32 g (1.2 oz)
- Cells w/BEC:2-3S Li-Po or 6-10 Ni-MH/Ni-Cd