Introducing
The Extra 300S is capable of superior precision and 3D action. It's constructed from very lightweight balsa and plywood, guaranteeing higher performance and more fun. This beautiful aerobatic aircraft features a fiberglass cowl. Pre covered in a colorful and attractive design which is sure to draw attention. All covering is completed at the factory, this cuts down the finishing time on the airplane. There is very little work that needs to be done to finish the airplane. If you are looking for an outstanding aerobatic flyer, this model will really get the adrenaline running.
Technical data
- Wingspan: 1700mm (66.9 in)
- Length: 1547mm (60.9 in)
- Flying weight: 4700-5200 gr
- Wing area: 55.2 dm2
- Wing loading: 90g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Gear type: Aluminum Hi-grade for main gear and spring wire for tail gear (included)
- Spinner size: Plastic 70mm (included)
- Radio: 4 channel minimum (not included)
- Servo: 6 standard hitorque servo: 2 aileron; 2 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery: 4.8-6V / 1200-2000mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: .120 / 2-stroke or .120/4-stroke glow engine or 20cc gas engine (not included)
- Motor: brushless outrunner 2000-2400 W, 450 KV (not included)
- Gravity CG: 110 mm (4.3in) Back from the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 12mm up/down, 10% expo; High: 15mm up/down, 10% expo
- Control throw Elevators: Low: 12mm up/down, 12% expo; High: 15mm up/down, 12% expo
- Control throw Rudder: Low: 25mm right/left, 15% expo; High: 45mm right/left, 15% expo
- Experience level: Intermediate
- Plane type: Scale Aerobatic
RECOMMENDED MOTOR AND BATTERY SET UP
- Motor: RIMFIRE .120 (not included)
- Lipo cell: 6-12 cells / 4000 – 5500mAh (not included)
- Esc: 80-100A (not included)
Feature
- Capable of both precise and extreme 3D aerobatics
- Designed for compatibility with both GP and EP flight
- Genuine Oracover covering
- Bolt-on two-piece wing for easy transport and setup at the field
- Removable canopy for easy change lipo battery and set up radio
- Extremely lightweight laser-cut all-wood construction
- Durable factory-painted fiberglass cowl
- Prepainted pilot figure, preinstalled in cockpit
- All hardware included