This is a radio controlled, electric powered, foam construction
             Receiver Ready Multiplex Funman Trainer Airplane.
                         For Beginning Modeler/Fliers.

      

FEATURES: Construction: Elapor foam on the fuselage, wing and tail section
          Wings: One-piece, foam construction with optional aileron control
          Motor: Brushless
          ESC: 20A
          Servos: Two, rudder and elevator control
          Radio Compartment: Foam, sized for high capacity LiPo packs
          Landing Gear: Prebent steel wire with 3" (76mm) foam wheels
          Hardware: Pushrods and other hardware included
          Propeller: 8x5" plastic, black in color with built-in aluminum
            spinner

      
      

INCLUDES: Foam Fuselage, Wings, and Tail Section, Prop, Motor, Landing Gear,
            Wheels, Instruction Manual, and Hardware

        

      
      


REQUIRES: Radio: 4 channel
          Battery: 3S 1500-2500mAh LiPo
          Battery Charger: To match selected LiPo battery
          LiPo charge bag and miscellaneous building equipment

      
      

SPECS:    Wingspan:   39.8 (1011mm)
          Wing Area: 341 sq in (22.02 sq dm)
          Wing Loading: 8.7 oz/sq ft (26.55 g/sq dm)
          Weight: 20.5oz (581g)
          Length: 32.3" (820mm)
          Airfoil: Flat bottom, high wing configuration
          Center of Gravity: 2.6" (67mm) back from the wing's leading edge
            at the fuselage sides
          Control Throws-
            Elevator, Up & Down: 0.43" (11mm)
            Rudder, Right & Left: 0.24-0.39" (6-10mm)
            Ailerons, up: 0.27" (7mm), down: 0.12" (3mm)

      
      

COMMENTS: This model is NOT made from polystyrene foam. For this reason, it is
           not possible to use white glue or epoxy glue. Use only a medium CA
           (CA+) glue and activator. Do not use CA glue designed for polysty-
           rene foam.

      
      

          If floats are desired, order