FEATURES: Construction: Built-up balsa and ply airframe Wings: Two-piece wing panels with aluminum joiner tube Horizontal Stabilizer: Two-piece with carbon fiber joiner tube Radio Compartment: Located under canopy, plywood reinforced Covering: Top Flite MonoKote Cowl: Fiberglass, painted to match covering Cockpit Detail: Dash with gauges Pilot Bust: Fiberglass, painted black, white, blue and blue-green Canopy: Clear, integrated with hatch, removal allows access to electronics and battery packs Landing Gear: Painted fiberglass Main Wheels: Treaded rubber 4" (102mm) diameter Tailwheel: Treaded rubber 1-1/2" (39mm) diameter Wheel Pants: Painted fiberglass Aileron Control: Four servo, prehinged with giant scale hinge point hinges Fuel Tank: Approximately 40oz (1183cc) Spinner: Aluminum 4" (102mm) diameter, painted blue Stabilizer: Bolt-on halves with prebuilt servo pockets, carbon fiber tubes Aileron Control: Dual Servo, double beveled control surfaces Rudder Control: Dual servo, double beveled control surfaces Hardware: Complete giant scale set with all-aluminum servo arms (normally an extra-cost add-on) Building Time: Ready to fly in 6-8 hours Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

INCLUDES: Pre-built and covered wing and fuselage sections, spinner, instrument panel, wheel pants, wheels, all hardware including aluminum servo arms and servo tray, pilot bust and manual

REQUIRES: Engine: (85 - 100cc) gasoline Propeller: Radio: At least 6 channel computer radio with mixing functions highly recommended Servos: 1 - 2 throttle and optional choke 8 standard size high torque digital, 2/elevator, 4/ailerons, 2/rudder Two 12" Servo Extensions: Receiver to each wing Three 36" Heavy Duty Servo Extensions: Outer aileron/elevator servos Three 24" Heavy Duty Servo Extensions: Inner aileron & rudder servos Two 40" Heavy Duty Servo Extensions: Elevator servos Three Y-Harnesses: Aileron & rudder servos Receiver Battery: NiMH, at least 4200mAh capacity Ignition Battery: NiMH, at least 2000mAh capacity Two Heavy Duty Switch Harnesses: Ignition battery and RX Two Charge Jacks If not using a radio with mixing functions or one with less than 6 channels, the following items are required; Dual Servo Reverser (FUTM4150) and Servo Synchronizer (FUTM4155) if Synchronizer is used, the two Y-harnesses are not needed Misc. Items: CA and epoxy glue, gasoline fueler valve, 1/2" foam rubber padding, 3' medium gasoline tubing, fuel filter, building and field equipment

SPECS: Wingspan: 100" (2540mm) Wing Area: 1892 sq in (122 sq dm) Weight: 24 - 28lb (10880 - 12700g) Wing Loading: 29 - 34 oz/sq ft (88 - 104g/sq dm) Length: 96" (2440mm) Airfoil: Fully symmetrical Center of Gravity: 3-1/2" (89mm) Back from the wing's leading edge measured at the wing tips, NOT THE FUSELAGE Control Throws- Low Rate High Rate 3D Ailerons: 1-3/8" (35mm) 17° 1-3/4" (44mm) 22° 2" (51mm) 26° Elevator: 7/8" (22mm) 7° 1-1/8" (29mm) 10° 4-1/4" (108mm) 38° Rudder: 2" (51mm) 10° 3" (76mm) 15° 8" (203mm) 44°