Empty
R 0.00
 
 
E FliteA Cap 232 BP ARF

Product Variants


Product Number: ZZEFL2400
More Images:
image image image image

Cap 232 BP ARF

Key Features

  • Ingenious open-structure balsa/light-ply design minimizes weight and maximizes strength
  • Light wing loading and large control surfaces for astonishing freestyle and 3D capability
  • 90% factory-built and covered in genuine UltraCote
  • Carbon fiber pushrods
  • All hardware and an Outrunner Stick Mount are included
  • Out-of-the-box compatibility with E-flite outrunner or inrunner brushless motors

Overview

The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wood airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote® and UltraCote Lite so you can be up and flying in no time.

Specs

  • Wingspan:35.5 in (900mm)
  • Overall Length:35.5 in (900mm)
  • Wing Area:425 sq in (27.5 sq dm)
  • Flying Weight:15.5-17 oz (440-480g)
  • Motor Size:Park 450 or Park 400
  • Radio:6 channels (for proper mixing)
  • Servos:4 sub-micro
  • Trim Scheme Colors:UltraCote White (HANU870), Sky Blue (HANU875), Bright Yellow (HANU872), UltraCote Lite Transparent Blue (HANU969), UltraCote Lite Transparent Clear (HANU964)
  • CG (center of gravity):4-3/4" (120mm) back measured from the center of the leading edge of the wing next to the fuselage
  • Prop Size:11x3.8 Slow Flyer
  • Hardware Included:Yes
  • Speed Control :20A Brushless
  • Recommended Battery:11.1V 3-cell 910-1320mAh Li-Po
  • Control Throw (Ailerons):1.25" (32mm) with 20% Expo on Low or 1.75" (45mm) with 43% Expo on High Up/Down
  • Control Throw (Elevator):2" (50mm) with 20% Expo on Low or 3" (75mm) with 49% Expo on High Up/Down
  • Control Throw (Rudder):3" (75mm) Low & High Left/Right
  • Scale:Park Flyer
  • Approx. Assembly Time:3-4 hours

Needed to Complete

6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Motor
20A Brushless ESC
11x3.8 Slow Flyer Prop
Battery & Charger