This is the radio controlled, glow powered, almost ready to fly
Top Flite AT-6 Texan scale Model with Retracts.
For Intermediate to Experienced Flyers.
Eligible to compete in the Fun Scale Class in AMA competition.
FEATURES: Construction: Balsa and plywood
Wing: One piece with center section and hardwood wing joiners and
wing joiner covers
Covering: Top Flite MonoKote
Radio Compartment: Plywood reinforced, accessible under canopy
Cowl: Painted fiberglass
Aileron Control: Dual servo
Canopy and Windows: Clear with painted-on window frames
Landing Gear: Mechanical retracts
Wheels: Foam construction, two 3" (76mm) diameter main wheels and
one 1.25" (32mm) Tailwheel
Interior Features: Two fully painted pilot busts, two instrument
panels with gauge detail and two seatbacks
Fuel Tank: 16oz (480cc), approximate
Engine Mount: Two-piece composite
Spinner: Aluminum 2.5" (63mm) diameter
Building Time: Ready to fly in approximately 18-25 hours
Warranty: Top Flite Models guarantees this kit to be free of defects
in material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.
INCLUDES: Top Flite AT-6 ARF Texan scale Model with retracts, wheels, engine
mount, two pilot busts, two instrument panels, canopy, two decal
sheets and instruction manual
REQUIRES: Radio: 6 channel
Servos: 7 servos with at least 50 oz-in torque and one retract servo
with at least 60 oz-in torque
6" (150mm) Servo Extension: One
12" (300mm) Servo Extension: Seven
Y-Harness: Two, for flap and aileron servos
Receiver Battery: 1000mAh minimum
Engine: .60 cu in (10cc) two-stroke OR .91 cu in (15cc) four stroke
SPECS: Wingspan: 69" (1755mm)
Wing Area: 730 sq in (47.1 dm2)
Weight: 8.5-9.5 lb (3855-4310g)
Wing Loading: 27-30 oz/sq ft (82-91 g/dm2)
Length: 51" (1295mm)
Airfoil: Semi symmmetrical, low wing placement
Center of Gravity: 4-1/4" (108mm) back from the leading edge of the
bottom wing measured where the center section of the wing and the
and the outer wing panel join
Control Throws; Low Rate High Rate
Elevator: 1/2" (13mm) 8° 5/8" (16mm) 11°
Rudder: 1-1/4" (32mm) 15° 1-3/4" (44mm) 22°
Ailerons: 3/4" (19mm) 19° 1" (25mm) 26°
Flaps: 1" (25mm) 26° 1-3/8" (35mm) 38°