This is the radio controlled, brushless electric powered,
               RR (Receiver Ready) Multiplex Solius Glider.

      

FEATURES: Construction: Elapor foam, white in color with orange and gray
            accents
          Wings: Two-piece
          Motor: Mutiplex Permax brushless BL-O 3516-0850
          Electronic Speed Control: Multiplex MULTIcont 40A with BEC
          Servos: Four nano (1-elevator, 1-rudder, 2-aileron) preinstalled
          Aileron Control Dual servo
          Propeller: Plastic, 12x6 folding design
          Spinner: White plastic 2.2" (55mm)
          Landing Gear: Single plastic wheel 1.7" (44mm)
          Canopy: Clear plastic

      
      

INCLUDES: RR Multiplex Solius Glider with Brushless Motor, 40A ESC, Prop,
            Spinner, four Nano Servos, Servo Extensions, and Instruction
            Manual

      
      

REQUIRES: Radio: 6-channel with receiver
          Battery: 3S 11.1V, (The Multiplex #15 7351 battery is recommended
            but not carried by us. The FlightPower Eon-X Lite 2100mAh 3S 11.1V
             is compatible. The ESC battery connector must be changed
            to a Dean's Ultra Male  to mate with this battery.)
          Battery Charger: Compatible with selected battery
          LiPo charrging bag
          Building and field equipment

      
      

SPECS:    Wingspan: (2160mm)
          Overall Length: (1100mm)
          Total Weight: 44oz (1250g) minimum, built as glider
          Total Weight: 51oz (1450g) minimum, electric powered
          Wing Area: 630 sq in (40.7 sq dm)
          Wing Loading: min 10.6  / 11.7 oz/sq ft
                            (30.7 / 35.7 g/sq dm)
          Airfoil: Flat bottom
          Center of Gravity: 2.7" (70mm) aft of the wing root leading edge
            measured at the fuselage

      
      

          Control Throws-
            Elevator: Up 0.39" (10mm), Down 0.39" (10mm)
            Rudder: Right to Left 0.98" (25mm)
            Ailerons: Up 0.59" (15mm), Down 0.31" (8mm)
            Spoilers: Both ailerons up 0.59" (15mm)
                      Spoiler Mixer (elevator trim compensation) 0.079" (2mm)

      
      

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.