This is the Align T-REX 600L Dominator Super Combo Helicopter Kit, including the Castle Edge HV 80 Brushless ESC, one BL855H HV Brushless Servo, three BL8150 HV Brushless servos, the 750MX 530kV Brushless Motor, a Gpro Flybarless System and Carbon Fiber Main and Tail Blades.

The Align T-Rex 600L Dominator incorporates all the top grade upgrades and the next generation GPro flybarless system to provide the stability and power to exceed all expectations. With a superior control feel, attractive looks and Super Combo package, the T-Rex 600L Dominator is the top choice for serious enthusiasts. 

The next generation GPro flybarless system features a faster CPU, capable of 20 times more processing, along with updated firmware allowing it to provide a faster and more precise response. Reaching the pinnacle of helicopter performance, the GPro also features adjustability through the PC, as well as iOS and Android smartphone apps.

Powered by the Align 750MX 530kV motor, engraved with Dominator insignia, the 600L will feel the extraordinary power output right away. BL815H and BL855H metallic brushless servos control the movements as standard equipment, boasting superior torque, speed with unparalleled efficiency and precision. These servos are highly appraised by Align team pilots for their low operation heat, contributing to dramatically increased longevity.

600L Dominator Features:

•  Equipped with the low CG DFC rotor head, effectively reducing wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed. The spindle shaft design features an oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.
• Top mounted motor base and imbedded servo mounts. The latest BL815H and BL855H metallic brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision.
• Lightweight H-cross section for electronic equipments.
• Sliding battery tray rails imbedded into 3K Side frame.
• Equipped with high strength CNC M1/118T helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti-torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss.
• CNC machined aluminum pieces including servo mount.
• Updated tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel. Highest spec and superior anti-wear material increases the overall strength and durability for torque tube drive gear, effectively minimize gear striping and crash damage.
  

Gpro Features:

• CPU processing 20 times faster than previous generation for precise and agile response.
• Fresh software process structure improves system compensation and keeps up-to-date flying performance.
• Utilizes latest iOS and Android APP that can be used to easily and directly adjust settings through mobile phone while flying outdoors.
• Human oriented interface allows convenient and rapid setup and installation.
• Superior flying characteristic remain the same flying control among T-REX 250~800 helicopters.
• Supports 90/120/135/140 CCPM swashplates
• Full support receivers and satellites currently on the market, including S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.
• Rudder Support 760μ Narrow Band servos
• Supports multi-blade rotor heads
• Built in governor function

600L Dominator Specifications:
Length: 1160mm
Height: 309mm
Width: 210mm
Main Blade Length: 600mm
Main Rotor Diameter: 1347mm
Tail Rotor Diameter: 260mm
Motor Pinion Gear: 14T
Main Drive Gear: 118T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 1:8.42:3.85
Weight (w/motor): 2900g 

Gpro Specifications:
Operating voltage range: DC 3.5V~8.4V.
Operating current consumption: <100mA @4.8V.
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Sensor resolution: 12bit
Engine speed governor range: 10500-21000 RPM
Operating Temperature: -20~65 degree
Operating Humidity: 0%~95%
Size: 36.5x25.2x15.6 mm Size/11.5g
RoHs certification stamp: Yes
Sensor resolution: 12bit
Supports 90/120/135/140 CCPM swashplates: Yes
Spektrum and JR Satellite antennas support: Yes (Replaces original factory receiver)
Futaba S.BUS/JR X.BUS system support: Yes
Rudder support 760μ narrow band servos: Yes
Supports multi-blade rotor heads: Yes

750MX Motor Specifications:
Input voltage: DC11.1V-50.4V
Max continuous current: 100A/165A(5sec)
Max output power: 4400W/7260W(5sec)
KV value: 530KV
Stator Arms: 12
Magnet Poles: 10
Dimension: spindle 6x52x61.5mm
Weight: 452g (approx.)

Includes: 

• T-REX 600L Dominator Kit
• (1) 600 Carbon Fiber Blade Set
  
• (1) 95 Carbon Fiber Tail Blade Set
  
• (1) Gpro Flybarless System
  
• (1) Castle EDGE HV 80 Brushless ESC
  
• (1) 750MX Brushless Motor (530KV)
  
• (3) BL815H High Voltage Brushless Servo
  
• (1) BL855H High Voltage Brushless Servo 

Needed To Complete:

• 2.4GHz 7-Channel Helicopter Radio System
  
• (2) 6S LiPo Battery, 2600 ~ 4600mAh (3300mAh suggested)
• Compatible Battery Charger
  
• Digital Pitch Gauge / Dial Pitch Gauge